6” Mix Flow Submersible Pump
Salient Features
- High Operating Efficiency And Low Power Bill
- Light weight & Noiseless operation
- Designed for wide voltage operation. (Working in low voltage)
- Most Of The Models Have ISI Mark
- Wet Type, Water Cooled Rewindable Motors
- Withstand wide voltage fluctuations
- Fully stainless steel stator tube body.
- Better efficiency and consistent performance.
- All C.I. parts are in C.E.D. Coated
- Special Carbon thrust bearing
- Oil seal for better protection of motor
- Specially processed 3 layered (Polyster+2BOPP) winding wire
- Epoxy coated Rotor to protect stamping against corrosion
- Special sleeve joint between wire and cable
APPLICATIONS
TECHNICAL SPECIFICATION
| HEAD RANGE | UP TO 215 MTRS |
|---|---|
| DISCHARGE RANGE | UP TO 1175 LPM |
| DELIVERY | 65 MM / 75 MM |
| POWER RATING | 3 H.P. TO 35 H.P. |
| VOLTAGE RANGE | 350 V TO 440 V (3-PHASE) |
MATERIAL OF CONSTRUCTION
| MOTOR SHAFT | AISI 410 / AISI 420 |
|---|---|
| THRUST BEARING | CARBON PLATE WITH S.S. SEGMENT (WITH TILTED PADS) |
| STAMPING | ELECTRIC SHEET |
| CASTING PARTS | GRADED CASTING |
| COPPER | E.C. GRADE COPPER (99.9% PURITY) |
| BUSH | LEADED TIN BRONZE (LTB-4) |
| FASTNERS | STAINLESS STEEL |
| RUBBER PARTS | NBR |
| PUMP SHAFT | AISI 410 |
| IMPELLER | NYLON 6 |
| DIFFUSER | GRADED CAST IRON |
| CASTING PARTS | GRADED CASTING |